|
<< Click to Display Table of Contents >> Navigation: General Design Information > Cam-Mechanism Design > Cam Terminology |
Terms : |
Definitions |
|---|---|
Cam (or Cam-Part) : |
The Part to which you add the 2D-Cam to generate the shape of the Cam-Profile. |
Cam-Shaft : |
The most common Cam-Part. It is a rotating-Part (a shaft), to which you add the 2D-Cam (or 3D-Cam) as a Cam-Profile. A Cam-Shaft usually rotates with a constant angular-velocity. |
Cam-Profile : |
The shape of the 2D-Cam (or 3D-Cam). Its surface is in continuous contact with the Follower-Profile. |
Track-Cam or Groove-Cam : |
A groove that is cut into a Cam-Blank with an Outer and an Inner Cam-Profile. A Follower-Roller fits in the groove. |
Follower (or Follower-Part) : |
The Part that supports the Follower-Profile. |
Follower Kinematic-Chain (or Mechanism) : |
A series of connected Parts, that includes the Follower-Part and the Tooling, or End-Effector. |
Follower-Profile : |
The surface that is in continuous contact with the Cam-Profile. It is machine component that is rigidly connected to the Follower-Part. |
Follower-Roller : |
A Follower-Profile that is cylindrical or barrel-shaped. It is rigidly connected to the Follower-Part. |
Flat-faced Follower : |
A Follower-Profile that is a flat surface. It is rigidly connected to, or integrated with, the Follower-Part. |
Translating Follower : |
A Follower-Part that slides along a straight axis. |
Reciprocating Motion : |
A Translating Follower with a non-progressive motion. |
Rotating Follower : |
A Follower-Part that rotates about a fixed axis. |
Oscillating Motion : |
A Rotating Follower with a non-progressive motion. |
Progressive Motion : |
A motion, usually followed by a Dwell, that moves the Follower-Part progressively in one direction. |
Non-Progressive Motion : |
A motion that returns the Follower-Part to its original position after each machine cycle. |
Indexing : |
A progressive motion, usually rotating. |
Indexer : |
A device whose input is a constant-speed (usually) Cam-Shaft and output is a rotating-Part with a progressive motion. The input rotates one time to index the output by the Index-Angle one time. The Index-Angle is such that 360º/(Index-Angle) is an integer. The Integer is also termed the Number-of-Stops of the Indexer. |
Cam-Blank : |
The material from which you cut the shape of the Cam-Profile. |
Force Closed Cam : |
An external Force (e.g. a Spring) holds the Follower-Profile against the Cam-Profile. The external Force must be greater than other forces that would lift the Follower-Profile off the Cam-Profile. |
Body Closed Cam : |
Two Follower-Profiles are rigidly connected to one Follower-Part, which have contact with two different Cam-Profiles, also in one Cam-Part. The contact between one Follower-Profile and one Cam-Profile prevents the other Follower-Profile from moving away from the other Cam-Profile. |
Track-Cam or Groove-Cam : |
A type of Body Closed Cam in which a slot is cut into a Cam-Blank. One or two Follower-Rollers fit between the Outer-Flank and Inner-Flank of the slot. |
Tooling : |
The component that intentionally has material-mechanism interaction. Also called the End-Effector. |
Payload : |
The total load that is referred to the Follower or Follower-Roller. |
Term : |
Definition |
|---|---|
Indexer : |
A device whose input is a constant-speed (usually) Cam-Shaft and output is a rotating-Part with a progressive motion (usually). When the input rotates one time, the output indexes by the Index-Angle one (most usually), two, or sometimes three times. The complete indexing motion usually has two segments: the Index-Segment and the Dwell-Segment. |
Index-Segment : |
The motion-segment that moves the follower (output-shaft). There is usually one index-segment. |
Index-Period : |
The angle the Input-shaft rotates while the output-shaft indexes. |
Index-Angle : |
The angle the output-shaft rotates in one index. 360 / Index-angle = number-of-stops. (an Integer) |
Dwell-Segment : |
The motion-segment in which the output-shaft does not move. There is usually one dwell-segment in a motion. |
Dwell-Period : |
The angle the input-shaft rotates while the output-shaft is in its dwell-segment. Dwell-Period = 360 – Index-Period |
Number-of-Stops : |
The number of times the output-shaft must index to complete one rotation of exactly 360º. “Number of Steps = 360º / Index-Angle” |
Indexer-Type : |
The number of index-segments in one rotation of the input-shaft (Cam-Shaft). |
Enter topic text here.